Am I the only one? I had audited MAME32 .118 and even though I am missing nothing, I am getting a "red light" next to the Profile name in ClrMame (3.103). I thought it was MAME32 doing it, so I waited until .118u1 came out, did another audit, still missing no sets, and I still get a red light next to the profile.

> Am I the only one? I had audited MAME32 .118 and even though I am missing
> nothing, I am getting a "red light" next to the Profile name in ClrMame (3.103).
> I thought it was MAME32 doing it, so I waited until .118u1 came out, did
> another audit, still missing no sets, and I still get a red light next to the
> profile.
>

Happening a lot here.
If I scan again the red light becomes green.


ciao
f205v

Never had that problem. You most likely miss files (and hide them) or you selected only some sets out of all (then it's normal)

> Never had that problem. You most likely miss files (and hide them) or you
> selected only some sets out of all (then it's normal)
>

could it be because you are missing samples and haven't asked cmp to scan those?

regards

Nope. That doesn't have an effect on the green/red status.


Roman Scherzer

Happening here tpo. All sets totally up to date and as far as I know, I'm not missing anything. Here are my scan results. Notice that it says I'm missing 2 BIOS roms but it only tells me what they are if I show no-dumps. So shouldn't my scan be 100% complete with a green light?

Missing Sets: 0 of 6693
Wrong SetName Case: 0
Wrong Named Sets: 0

Missing Roms: 963 (963 are 'nodumps') of 95056
Missing Bytes: 3gb of 55gb
Missing BIOS Roms: 2 of 102
Wrong Named Roms: 0
Wrong RomName Case: 0
Wrong Sized Roms: 0
Wrong Date/Time Roms: 0
Wrong CRC32s: 0
Wrong MD5s:
Wrong SHA1s:

Missing Samples: 0 of 2066
Wrong SampleName Case: 0

Missing CHDs: 25 (25 are 'nodumps') of 232
Wrong CHD Case: 0
Wrong Named CHDs: 0
Wrong CHD_MD5/SHA1s: 0

Unneeded Files/Folders: 1

Number Of Sets: 6693
Number Of BIOS sets: 35
Number Of Parents: 1482
Number Of Clones: 3075
Number Of Others: 2136
Number Of Roms: 95056
Number Of BIOS Roms: 102
Number Of Samples: 2066
Number Of 'nodump' ROMs: 974
Number Of 'baddump' ROMs: 449

I have exactly the same issue as the last poster- latest clrmame update was unsuccessful in returning a green light despite a fresh scan

> Never had that problem. You most likely miss files (and hide them) or you
> selected only some sets out of all (then it's normal)
>

> Never had that problem. You most likely miss files (and hide them) or you
> selected only some sets out of all (then it's normal)
>

Not to my knowledge. I've always had a green light up until this latest release of ClrMame. Wasn't sure if it was ClrMame or MAME32 being the culprit. Even with the newest release of both (3.103a for ClrMame, 118u2 for MAME32) I am still getting a red light even though it's showing me I am missing nothing.

> > Never had that problem. You most likely miss files (and hide them) or you
> > selected only some sets out of all (then it's normal)
> >
>
> could it be because you are missing samples and haven't asked cmp to scan those?
>
> regards
>
No I have it scan samples and CHD files as well. Still comes back as missing nothing.

> > Am I the only one? I had audited MAME32 .118 and even though I am missing
> > nothing, I am getting a "red light" next to the Profile name in ClrMame
> (3.103).
> > I thought it was MAME32 doing it, so I waited until .118u1 came out, did
> > another audit, still missing no sets, and I still get a red light next to the
> > profile.
> >
>
> Happening a lot here.
> If I scan again the red light becomes green.
>
>
> ciao
> f205v
>
I've tried that also. The full scan seems to take a fraction of the time the 2nd time around (like 16 seconds) but I still get a red light.

> Happening here tpo. All sets totally up to date and as far as I know, I'm not
> missing anything. Here are my scan results. Notice that it says I'm missing 2
> BIOS roms but it only tells me what they are if I show no-dumps. So shouldn't
> my scan be 100% complete with a green light?
>
> Missing Sets: 0 of 6693
> Wrong SetName Case: 0
> Wrong Named Sets: 0
>
> Missing Roms: 963 (963 are 'nodumps') of 95056
> Missing Bytes: 3gb of 55gb
> Missing BIOS Roms: 2 of 102
> Wrong Named Roms: 0
> Wrong RomName Case: 0
> Wrong Sized Roms: 0
> Wrong Date/Time Roms: 0
> Wrong CRC32s: 0
> Wrong MD5s:
> Wrong SHA1s:
>
> Missing Samples: 0 of 2066
> Wrong SampleName Case: 0
>
> Missing CHDs: 25 (25 are 'nodumps') of 232
> Wrong CHD Case: 0
> Wrong Named CHDs: 0
> Wrong CHD_MD5/SHA1s: 0
>
> Unneeded Files/Folders: 1
>
> Number Of Sets: 6693
> Number Of BIOS sets: 35
> Number Of Parents: 1482
> Number Of Clones: 3075
> Number Of Others: 2136
> Number Of Roms: 95056
> Number Of BIOS Roms: 102
> Number Of Samples: 2066
> Number Of 'nodump' ROMs: 974
> Number Of 'baddump' ROMs: 449
>
That's more or less what I get too (updating numbers for the MAME32 118u2 release)

I have just updated to version 3.104 and still no green light. Anyone got any ideas?

> I have just updated to version 3.104 and still no green light. Anyone got any
> ideas?
>
Did we ever get a solution to this problem?