Welcome to Emulationworld

Forum Index | FAQ | New User | Login | Search

Make a New PostPrevious ThreadView All ThreadsNext Thread**


SubjectHuE 0.51, pSwan ver 0.07, DSEmu 0.4.4 & atari++ 1.42 Reply to this message
Posted byHawq
Posted on07/04/05 02:29 PM



HuE 0.51
PC-Engine emu, heres whats new:

  • State saving was corrected.
  • Somewhat, perhaps sound became unable to crack.
  • Perhaps the operation wolf it stopped freezing.

Get from here gotta love that babelfish dont ya?

pSwan ver 0.07
WonderSwan emu, heres whats new:
  • Improvement of sound does not ride in the track. . .
  • Because, changing feeling, it tried inserting the hand in menu constitution and the like.
    As for details please refer to readme.

Get from here

DSEmu 0.4.4
DS emu, heres whats new:
  • Implemented coprocessor 15 ability to switch ARM9 vector execution address from 0xffff0000 to 0x00000000. Required for DSLinux to work. Unfortunately DSLinux still doesn't run under DSEmu but it's a step on the way.
  • Fixed implementation of ARM opcodes that used suffix 'S'. These weren't dealing with the spsr and cpsr correctly.
  • Implemented timers 0, 1, 2 and 3 and attempted to get them running at approximately the right rate.
  • Got keyboard interrupts working. Tutorial eight now works in DSEmu.
  • Implemented coprocessor 15 ability to switch the ARM9 into low power mode.
  • Changed SWI 4 and SWI 5 implementation to use coprocessor 15's instruction to switch into low power mode, and implemented in ARM assembly in the fake ARM9 BIOS instead of C. This works much more like the actual DS hardware now. Previously SWI 4 and 5 only really worked for the vertical blank interrupt, now it works for all interrupts.
  • Fixed some timing issues with interrupts and low power mode.

Get from here

atari++ 1.42
Atari 400, 800, 400XL, 800XL, 130XE & 5200 emu, heres whats new:
  • Fixed race condition when switching the resolution, could cause crashes.
  • Fixed Antic CHARBASE switches, did not keep care of horizontal scrolling correctly.
  • Fixed leaking key presses from the GUI to the core.
  • Fixed PIA Port A handling, Port A input is non-buffered.
  • Fixed Monitor backspace key on some broken ncurses implementations.
  • Added "graphical" single-step trace command for the monitor.
  • History of the monitor is now a tad smarter and buffers un-finished lines.
  • Fixed "dummy writes" for INC and DEC commands.
  • Fixed player horizontal split, did erraneously remove the old player.
  • Fixed timing of the pokey timers, should be more precise now.
  • Fixed XIO for serial baud generator, argument zero leaves baud rate alone.
  • Fixed serial input counter for concurrent mode
  • Fixed state parser, is now less sensitive to CF/LF vs. LF confusion.

Get from here

The wise man knows when he does not know enough