Welcome to Emulationworld

Forum Index | FAQ | New User | Login | Search

Make a New PostPrevious ThreadView All ThreadsNext ThreadShow in Flat Mode*


SubjectRe: Buttons working w/ Jornada 568? Reply to this message
Posted byAnonymous (212.194.42.191)
Posted on11/23/01 05:53 PM



I think I've the 'prob of buttons' or prog of gapi on my hp. It's the only response I see for my prob :(

So I'll wait for a solution for this prob, hopping it will solve my problem.


> Strange.
> I can get it to work fine on my HP 568. The program should take over control of
> the Buttons without unmapping them (except during game play).
> Are you sure you downloaded the proper file? The autoinstaller version is not
> the proper version and will not work. The keys will be unuseable.
>
> If you download the cab file it should allow you access to the buttons and
> escape the games properly.
>
> > hehe :)
> >
> > Of course I know that. The fact is that on the HP, it is not possible. I've
> also
> > tried all the combinations possible, but unfortunately, nothing appens. The
> only
> > way is reset :(
> >
> >
> > Notice that on the forum for pocketgb, there is the same prob evoqued. The
> > explanation for this prob is that the mapping capture the buttons, and the
> only
> > way to be able to play is to 'unmap' the buttons. I haven't tried that,
> because
> > I need my buttons to be mapped, and even if mame or pocketgb run well doing
> > that, it's a constraint too much important. (sorry for my bad english)
> >
> > > To acknowldge OK hit the Left direction and then the right direction on the
> > > gamepad. that should get you past the OK screen.
> > >
> > >
> > > > Hi
> > > ,
> > > >
> > > > Even downloading the arm cab, I've the same prob (the buttons don't
> respond,
> > > and
> > > > I'm not able to say 'OK' on the first screen of a rom launch).
> > > >
> > > > Have you a solution ? I've a HP565, french version. I've made a hard
> reset,
> > > and
> > > > reinstalled mame, without more result (downloaded 2 times also).
> > > >
> > > > Fred
> > > >
> > > > > > I have been thru these posts, and there seems to be some uncertainty
> > about
> > > > > > whether you can really get MameCE working, on the Jornada 568.
> > > > > >
> > > > > > I've tried every button, to no avail. And I'm not even sure how to
> exit
> > > the
> > > > > > program properly, shy of a warm reset.
> > > > > >
> > > > > > Any advice?
> > > > > >
> > > > > Yes the buttons work on the Jornado 568. You need to download the cab
> file
> > > for
> > > > > the ARM processor.
> > > > > The autoinstaller version hasn't been updated yet.
> > > > >
> > > > >
> > > > > Cheers,
> > > > > -Techmaster
> > > > >
> > > >
> > >
> > >
> > > Cheers,
> > > -Techmaster
> > >
> >
>
>
> Cheers,
> -Techmaster
>




-
Entire Thread
Subject  Posted byPosted On
*Buttons working w/ Jornada 568?  Anonymous11/14/01 11:33 PM
.*Re: Buttons working w/ Jornada 568?  Tekhmaster11/16/01 06:19 PM
..*Re: Buttons working w/ Jornada 568?  Anonymous11/22/01 07:33 AM
...*Re: Buttons working w/ Jornada 568?  Tekhmaster11/22/01 02:34 PM
....*Re: Buttons working w/ Jornada 568?  Anonymous11/22/01 02:49 PM
.....*Re: Buttons working w/ Jornada 568?  Tekhmaster11/23/01 00:40 AM
.......Re: Buttons working w/ Jornada 568?  Anonymous11/23/01 05:53 PM
..*Re: Buttons working w/ Jornada 568?  Anonymous11/16/01 09:37 PM