Forum Index | FAQ | New User | Login | Search

Make a New PostPrevious ThreadView All ThreadsNext ThreadShow in Flat Mode*


SubjectRe: HELP:: Compiling for H/PC Mips Reply to this message
Posted byAnonymous (203.144.144.233)
Posted on03/10/02 00:57 AM



Hello,
Thanks for reply, now I can get the compiled code from MameCE10x running can't seem to get the ce3 version run because CE 2.11 don't have the AYGshell.dll. Now I'm working on the key input part. All key are working except the arrow key and I suspect that there is a hard coded key to casio PPC somewhere but still didn't find it.

> Which version of the OS are you using? If it's for 2.11, I'd be surprised if
> you could get MameCE3 to work. Somewhere in the messages, there's a link to
> Darren's source for the Casio, which compiles OK for 2.11. You will need to
> make changes for your particular machine, however, to get the keys & stuff to
> work.
>
> In addition to setting the toolbar to "HPC 2.11" (and not "Pocket PC" if you're
> using 2.11), make sure that it's set to compile "MIPS" as well.
>
> Actually, I've been wondering if I could get MameCE3 to compile for my machine,
> if I create a "gx.dll" (GAPI) for it. Normally, as far as I can tell, GAPI is
> only available on Pocket PC (OS 3.0) machines, but someone on the 'net made one
> for the Casio that could be recompiled for any machine you want. SO, with GAPI,
> it'd probably be easier to port MAME, as I think that was one of the big
> problems I had when I tried MameCE3 (eventually falling back to using Mameboy,
> since it was basically the same as Darren's code).
>
> OK, maybe that isn't your immediate problem. Um, did you check the compiler
> settings before you let 'er rip? Go to "Project/Settings" and look at the C++
> tab, in the Preprocessor field. It shouldn't have "GAPI" in there (unless you
> plan to have a gx.dll on your machine that is made for it). I think I had to
> mess with something, but that was too long ago for me to remember. Sorry. :-)
> Maybe you can be more specific with your error message? When it stops on
> "clmips" it should show compiler errors! Probably a bunch of them.
>
> G.
>
> > > I'm trying to compile from source using eVC. Besides setting the target
> > platform
> > > to H/PC, what more do I need to do?? Please help
> > >
> > Sorry what I mention is the mamece3 source. I did compile serveral time but it
> > stop with error running clmips.exe. Any idea please
>




-
Entire Thread
Subject  Posted byPosted On
*HELP:: Compiling for H/PC Mips  Anonymous02/27/02 07:56 AM
.*Re: HELP:: Compiling for H/PC Mips  Anonymous02/27/02 11:55 PM
..*Re: HELP:: Compiling for H/PC Mips  Anonymous03/05/02 08:43 PM
....Re: HELP:: Compiling for H/PC Mips  Anonymous03/10/02 00:57 AM