Welcome to Emulationworld

Forum Index | FAQ | New User | Login | Search

Make a New PostPrevious ThreadView All ThreadsNext Thread*Show in Threaded Mode


Subjectwanted: Mame for MP-C33 (= MP-C303) Reply to this message
Posted bymips
Posted on11/16/03 04:12 PM



Hi all!
I have a MP-C33 from JVC with WinCE 3.0. I like to have a version of Mame for it.
The MP-C33 is available in Germany. A very similar model, the MP-C303 was sold in Japan. The MP-C33 has a 180 MHz VR4122 - which is a MIPS processor, 32 MByte RAM and a screen with 1024x600 Pixel. I already tried out MameCE3 (www.mameworld.net/mamece3) and MameBoy, that are versions for Casio PDAs with MIPS processor, but they did not work on the MP-C33.
Is there someone that already has binaries of Mame for the MP-C33 (or for the MP-C303)?
Any help appreciated.

Thanks in advance,
Raphael




SubjectRe: wanted: Mame for MP-C33 (= MP-C303) new Reply to this message
Posted byTekhmaster
Posted on12/30/03 03:40 PM



> Hi all!
> I have a MP-C33 from JVC with WinCE 3.0. I like to have a version of Mame for
> it.
> The MP-C33 is available in Germany. A very similar model, the MP-C303 was sold
> in Japan. The MP-C33 has a 180 MHz VR4122 - which is a MIPS processor, 32 MByte
> RAM and a screen with 1024x600 Pixel. I already tried out MameCE3
> (www.mameworld.net/mamece3) and MameBoy, that are versions for Casio PDAs with
> MIPS processor, but they did not work on the MP-C33.
> Is there someone that already has binaries of Mame for the MP-C33 (or for the
> MP-C303)?
> Any help appreciated.
>
> Thanks in advance,
> Raphael
>

I think you will have to create your own version for that device. If your not a coder, im guessing your out of luck. Sorry.

Cheers,
-Techmaster


Previous ThreadView All ThreadsNext Thread*Show in Threaded Mode