Welcome to Emulationworld

Forum Index | FAQ | New User | Login | Search

Make a New PostPrevious ThreadView All ThreadsNext ThreadShow in Flat Mode*

SubjectRe: help setting up to play visual pinball Reply to this message
Posted byAJR
Posted on07/16/01 03:29 PM

1) Install Visual Pinball
2) Unzip VPinMAME to a directory called something like c:\vpinmame
3) Run setup.exe in the c:\vpinmame directory and go through the prompts
4) Download and unzip the table(s) into a directory called
5) Download and unzip the .vbs files (script files) into c:\vpinmame\tables
6) Download the ROMs (keep them zipped) into c:\vpinmame\roms
7) Run Visual Pinball
8) Go File -> Open, select the c:\vpinmame\tables directory and select the table
9) Press F5 to run the table

The first time you run the table, the roms will default to factory setting. You can either press ESC and quit back to VP then run it again, or press F3 and the ROMs will reset. Then press the 5 key for credits and the 1 key to start a game.


> read faq posted earlier and stuck when i get to when you unzipped vpinmame
> should see a file called setup.bat which i dont
> could someone tell me what iam doing wrong
> thanks

Entire Thread
Subject  Posted byPosted On
*help setting up to play visual pinball  lee455707/14/01 04:30 PM
..Re: help setting up to play visual pinball  AJR07/16/01 03:29 PM