Hello again,

Maybe I found something...
On page 4 of Virtua Striker 3 Kit Manual (http://www.segaarcade.com/pdfs/virtuastriker3/vs3-kit-manual.pdf) there is the following writing:

"You MUST USE THE COIN METER SUPPLIED WITH YOUR KIT to assure proper Coin acceptance.
A minimum 18 Gauge wire should be used from the Coin Meter 1 output line on your JAMMA Harness.
The 5vdc ( Yellow ) wire found in the wiring bag of your kit MUST BE USED for the supply voltage to the meter."

I don't have any Coin Meters in my cabinet. May it be this the root of all of my input coin problems with Virtua Striker 3? If so, is there a way to circumvent the coin meters (I don't understand how the system could know about the presence/absence of these devices), or can you please point me to a site where I can buy a compatible one?

Many thanks for your help
--
N.