Welcome to Emulationworld

Forum Index | FAQ | New User | Login | Search

Make a New PostPrevious ThreadView All ThreadsNext ThreadShow in Flat Mode*


SubjectRe: Konami Cobra pinouts? Reply to this message
Posted byArgyle
Posted on07/28/04 02:43 PM



Thanks, I knew about Digikey but haven't searched extensively for the connectors, was hoping that someone else already knew the info :)

I did some research - since both Fighting Bujutsu and Naomi are JVS (new JAMMA) standard, the I/O board from a Naomi should work fine with Fighting Bujutsu according to a Japanese site I found...one downside is that the Konami I/O board had dipswitches which are missing on the Naomi I/O board, but the game should be playable...

Once I get the power wired up, we'll see if my board actually works...wish me luck, I'll keep you all updated. :)

> I find the ultimate place for finding connectors and information about these is
> www.digikey.com. It will not provide info on the pinouts for your PCB ofcourse,
> but you will probably find the correct connectors there.. Just keep looking..
> Try Molex first..
>
> Cageman007
>
>
>
> > > Replying to my own post...
> > >
> > > A bit of research suggests that the game is JVS compliant, for the most
> part,
> > > except for the power connectors (one is JVS, the other two are proprietary
> and
> > > marked as "3.3V" and "12V")...
> > >
> > > Anyone know a good place to get matching connectors? I assume I could use
> > > something like a Sega NAOMI I/O board to convert to a standard JAMMA pinout?
> > >
> > > Does anyone have more detailed information on the two proprietary power
> > > connectors?
> > >
> > > > So I just got a Fighting Bujutsu board (Konami Cobra hardware)...
> > > >
> > > > Unfortunately I didn't get any documentation, and the board appears to be
> > very
> > > > much not JAMMA...it looks like it has three or four separate power supply
> > > > connectors, two VGA outputs, 4.1 channel sound, and what appears to be a
> USB
> > > > port for input :(
> > > >
> > > > Anyone have any documentation for the board, or have any idea what else I
> > > might
> > > > need to track down or build to get the thing working? Thanks :)
> > > >
> > >
> > Hmmm, I'm not entirely sure, you could try happcontrols.com or maybe
> > seuservice.com I suppose and see what they throw up?
> >
> > Six...
> >
>


-
Entire Thread
Subject  Posted byPosted On
*Konami Cobra pinouts?  Argyle06/18/04 05:57 PM
.*Re: Konami Cobra pinouts?  Argyle06/18/04 11:10 PM
..*Re: Konami Cobra pinouts?  Sixtoe06/20/04 11:31 PM
...*Re: Konami Cobra pinouts?  Cageman00707/22/04 05:08 PM
.....Re: Konami Cobra pinouts?  Argyle07/28/04 02:43 PM